SUKATAN PEMBELAJARAN |
||
KURSUS BASIC MACHINE OPERATION AND MAINTENANCE PELAJAR KIMPALAN |
||
TAJUK |
ISI KANDUANGAN |
|
1. Apply machine maintenance schedule |
1.1 |
Ability on servicing procedure. |
1.2 |
Ability on schedule checklist. |
|
1.3 |
Ability on Job Oder of maintenance requirement. |
|
1.4 |
Ability on of type of maintenance |
|
2 Apply maintenance requirement |
2.1 |
Ability on tools and equipment required. |
2.2 |
Ability on Preventive maintenance. |
|
2.3 |
Ability on Corrective maintenance |
|
2.4 |
Ability on Predictive maintenance |
|
3. Perform mechanical power transmission maintenance |
3.1 |
Interpret Machine tool (mechanical) maintenance technical manual. |
3.2 |
Interpret Technical drawing. |
|
3.3 |
Prepare Tools for maintenance (mechanical). |
|
3.4 |
Check mechanical power transmission components for maintenance activity. |
|
3.5 |
Dismantle and replace or repair accordingly to SOP mechanical power transmission components for maintenance activity. |
|
3.6 |
Perform mechanical power transmission assembly. |
|
3.7 |
Change or refill lubricant for mechanical power transmission components. |
|
3.8 |
Execute troubleshooting mechanical power transmission activity. |
|
3.9 |
Decide mechanical power transmission component problem by repair or replace |
|
3.10 |
Dismantle and replace or repair accordingly to SOP mechanical power transmission components for maintenance activity |
|
3.11 |
Perform mechanical power transmission assembly |
|
3.12 |
Change or refill lubricant for mechanical power transmission components |
|
3.13 |
Execute troubleshooting mechanical power transmission activity |
|
3.14 |
Decide mechanical power transmission component problem by repair or replace |
|
4. Perform machine lubrication and cooling system maintenance |
4.1 |
Identify types and functions of cooling system |
4.2 |
Identify types of cooling system components |
|
4.3 |
Troubleshooting of component failure |
|
4.4 |
Check cooling system components |
|
4.5 |
Confirm cooling system components to be repaired, replace or cleaned |
|
4.6 |
Replace, clean or refill cooling system components |
|
5. Perform machine functionality test |
5.1 |
Perform test run method and procedures of the machine tools under condition without load and with load using |
5.2 |
- visual |
|
5.3 |
- vibration |
|
5.4 |
- noise |
|
5.5 |
- heat |
|
5.6 |
Confirm functionality of machine tools |
|
5.7 |
Utilize testing equipment |
|
5.8 |
Write maintenance technical report |